Please use the steps below to configure a manual IKEv2 connection on your macOS computer with macOS 12:
- Select the Apple icon in the top left, then select System Preferences
- Select Network
- Select the "Plus" icon in the lower left, then fill out the settings accordingly and select Create:
- Interface: VPN
- VPN Type: IKEv2
- Service Name: VyprVPN (or any other name of your choosing)
- After creation, your new VPN connection will be listed on the left side of the Network menu. Fill out the Server Address and Remote ID accordingly, then select Authentication Settings
- Server address: enter the address for your preferred server location found here
- Remote ID: *.vyprvpn.com
- After selecting Authentication Settings, set the dropdown menu to Username, then enter your VyprVPN login information and select OK
Your VyprVPN IKEv2 connection has been created! To connect or disconnect, return to the Network section of the System Preferences menu. Select your VPN connection on the left side, and select Connect or Disconnect.
If you need any further assistance, please contact our 24/7 Customer Success Team, who would be glad to assist.