You can create a connection using the L2TP protocol manually using the following instructions:
To configure the L2TP/IPsec connection:
1. Click on the Start menu.
2. Click on Settings.
3. Click Network & Internet from the Settings menu.
4. Select VPN from the left side of the window.
5. Click Add a VPN connection.
6. Fill out the settings listed in the box below.
VPN provider: Windows (built-in) Connection Name: VyprVPN Server name or address: See server list VPN type: L2TP/IPsec with pre-shared key
Pre-shared key: thisisourkey Type of sign-in info: User name and password User name (optional): Your VyprVPN email address Password (optional): Your VyprVPN password Remember my sign-in info: Checked
7. Click Save.
8. You will now see the connection in the Network & Internet window.
9. Click Network and Sharing Center under Related settings.
10. In the Network and Sharing Center, click Change adapter settings on the left side of the window.
11. Right-click on VyprVPN and choose Properties.
12. Navigate to the Security tab and for Data encryption select: Maximum strength encryption (disconnect if server declines). Click OK.
13. Close the Network and Sharing Center window and you will find yourself back in the VPN section of Network and Internet.
How to Connect:
1. Click on the Start menu.
2. Click on Settings.
3. Click on Network & Internet from the Settings menu.
4. Select VPN from the left side of the window.
5. Click on VyprVPN and then click the Connect button.
6. You are now connected to VyprVPN! Click Disconnect from this screen at any time to disconnect from the service.
7. You can check your IP here.
If you need any further assistance, please contact our 24/7 Customer Success Team, who would be glad to assist.