If you are experiencing slow speeds while connected to VyprVPN, or if you are are sometimes having trouble connecting to VyprVPN on a Windows PC, we recommend following the steps below:
Perform a complete refresh of your network:
- Power off your computer
- Shut down your router
- Shut down your modem
- Wait 30 seconds, then power on your modem again
- Wait until your modem has booted, then power on your router
- Power on your computer
Try different VPN protocols:
- Click the Customize option in the bottom left-hand corner
- Click the Protocol tab
- Select the desired protocol
- Click the Left Arrow at the top to return to the Customize menu
- Click Connection at return to the Connection
Select the fastest server option, or choose a server with low ping from the server list:
- Click the Servers option in the bottom right-hand corner
- Choose the fastest server option towards the top, or select another server with green ping
| Note: If you require to connect to a specific server, please note that factors including the ping time to the server, the geographical distance between your physical location and the server location, and the protocol you are connecting to the VPN server affects the speeds you will receive. |
While VyprVPN is configured to minimize the amount of speed loss when connected, we unfortunately cannot guarantee that you will not experience loss of speeds even after attempting the above troubleshooting. There are many factors outside of our control affecting your speeds, including the route your ISP provides you to our VPN servers.
If you need any further assistance, please contact our 24/7 Customer Success Team, who would be glad to assist.